10″ Hydro-Cure Sediment Filter – 5 Micron
| SKU: | MB0509880006 |
Product Description
As a depth filter, Hydro- Cure® sediment cartridges trap particles throughout the entire cross section of the filter. Larger particles are trapped on or near the surface of the filter and the smaller particles are trapped throughout the inner layers of the cartridge. The gradient density design allows for optimum dirt holding capacity and minimal change-outs.
Hydro-Cure® melt blown filter cartridges are made of polypropylene resin meeting FDA regulation 21CFR177.1520. No binders, lubricants or anti- static agents are used in our manufacturing process. Clack melt blown polypropylene filters have been tested and certified under NSF/ANSI Standard 42 for material requirements only. The inert polypropylene resin provides exceptional chemical compatibility to handle a wide range of process fluids.
Hydro-Cure® cartridges are designed for knife edge seal housings to provide a positive seal without the use of end caps or gaskets. Hydro-Cure® cartridges are interchangeable with most standard pleated, string wound and other melt blown cartridges.
